Ger Detect Gold Seeker Device


GOLD SEEKER with Pulse Induction System The quickest, simplest, most modern and precise method for detecting gold and coins beneath the earth. Two systems are used by the GOLD SEEKER unit to distinguish between precious and non-precious metals. The ground induction function was added to this unit, which is capable...

$2,500.00

GER DETECT

Metal Detector

2 In Stock

Title :

GOLD SEEKER with Pulse Induction System

The quickest, simplest, most modern and precise method for detecting gold and coins beneath the earth.

Two systems are used by the GOLD SEEKER unit to distinguish between precious and non-precious metals.

The ground induction function was added to this unit, which is capable of generating (Eddy Current) (transmitter and receiver).

It sends a signal to the search coil when the system operates (Double D Coil), which in turn produces a spiral current signal (Eddy Current).

This will produce amplifications of spiral waves to more than 1000 pules per second to help the system cover higher depths as well as analyze the target signal to determine if the metal detected is precious or non-precious.

A unique aspect of this unit is its ability to calibrate with the earth to ensure that no signals arising from soil moisture, mineral rocks or soil containing mineral salts or solid soil are disturbed.

 

After the ground balance mechanism and sensitivity, setting are adjusted, you can begin searching by raising the search coil 2 cm above the ground and sweeping it right and left, keeping it parallel to the ground.

 The unit can make a continuous beep sound when a precious metal signal is picked up, and the Green Indicator comes on.

 

If the signal is detected for a non-precious metal, an erratic sound is produced by the system and the red indicator comes on. 

To increase the sensing range of the coil to reach greater depths, press the Tune button if the signal from the detected target is small, and confirm the target.

 

Sweep the search coil from right to left and left to right over each area you scan, to avoid missing small and deep targets.

 

Hover the coil slowly over the target to make sure the target form is precious or non-precious.

To ensure that the target form is precious or non-precious, stop the coil above the target while maintaining a distance of 2 cm above the ground.

 

GOLD SEEKER - Technical Specifications

 

  • GOLD SEEKER uses the Pulse Induction System to operate.
  • The method of calibration with the earth.
  • Light indicators operate on the control panel of the handle of a device:
  • The Red light means that non-precious metals exist (ferrous).
  • The presence of precious metals is shown by the green light (nonferrous).
  • A tune button with a blue indicator that has the purpose of increasing the coil's sensing range to greater depths.
  • There are two search coils in the GOLD SEEKER:
  • Big coil: senses the large size of metals in a specialized way.
  • Small coil: Specializes in detecting small metal sizes.
  • BT 144 battery
  • It hits the ground up to 3.5 meters deep.
  • GOLD SEEKER has the potential to penetrate to wide depths of ground layers that are difficult to reach for many other devices.
  • It works in all types of terrain and in the climatic conditions that are most difficult.
  • Both soil types and rocks are not affected by the system.
  • The weight of the unit with the bag and the complete accessories is just 7.5 KG.
  • This device is designed for all countries and regions to use.
  • Two years warranty from the date of purchase.
  • The GOLD SEEKER system is one of the best German inventions with an international specification for European cε certification.